Established in 1991, GM Mining Electrics provides auto-electrical services to the worldwide mining industry, including:

    * Remote and tele-remote control equipment
    * Auto-electrical work to various surfaces and underground equipment
    * Component manufacture and remanufacture
    * Short and long-term labour hire
    * Supply of parts and spares
GM Mining Electrics provides a range of remote and tele-remote control equipment to improve safety and operation.
GM Mining Electrics’ are durable, adaptable and comply with mine department and Australian regulations.
GM Mining Electrics offers purpose-built tele-remote control operator stations with a chair, two LCDs, audio and machine fault feedback, and air-conditioning.
GM Mining Electrics’ machine logic control system has a 1/3in CCD colour fixed view camera, a 440,000px zoom camera, a 12V microphone and a pan and tilt unit.
GM Mining Electrics designs, builds and commissions electrical and hydraulic interfaces.

GM Mining Electrics’ TELECAM series of are designed to replicate the vehicle operator’s cabin as closely as possible, thus reducing operator confusion in the switch from manual to remote operation.

TELECAM vary in configuration from machine to machine. Each system can be tailored to meet clients’ specific requirements.

The HBC FST-735 and FST-770 are fully proportional radio systems capable of controlling mobile mining equipment such as LHD loaders (boggers), skid steer loaders, drill rigs, dozers, excavators, cranes, rock breakers and trucks.
Durable and adaptable mine systems

The HBC radio systems are durable and adaptable, and have proven workability within the Australian mining industry. The systems meet all mine department and Australian regulations, and have a dual failsafe emergency-stop system.
Radio system transmitter

The HBC radio system’s transmitter has the following features:

    * Compact, lightweight and rugged construction
    * IP65 enclosure protection
    * Large robust joysticks
    * ‘Deadman’ service brake application
    * Fully sealed switches
    * ‘Plug in’ battery pack
    * Battery-indication LED and audible alarm
    * TX tilt protection
    * Rigid shoulder harness or belt clip mounts

Radio system receiver

The HBC radio system’s receiver has the following features:

    * Machined die-cast aluminium construction
    * IP65 enclosure protection
    * LED status indication lights
    * High quality multi-pole electrical connector
    * Receiver outputs available include digital, analogue, PWM, DDEC, Danfoss

Radio system batteries

The HBC radio system is provided with two high-capacity nickel metal hydrate rechargeable batteries. Each battery provides enough operating time to cover a shift of operation - typically 12 hours. In addition, GM Mining Electrics provides a single-station battery charger with LED indication, which shows the state of the batteries.
Drill rig remote control system

GM Mining Electrics has designed a state-of-the-art remote control system to operate the latest generation of drilling rigs. This system is versatile, adaptable, and expandable, and meets all of the current remote control regulations and Australian standards. The drill rig remote control system has the following features:

    * Failsafe design
    * Disparity checking
    * Digital and analogue inputs and outputs
    * Programmable

Tele-remote control operator stations

GM Mining Electrics provides various styles of operator stations, including:

    * Purpose-built portable cabins
    * Mobile vehicles
    * Control rooms - located on the surface or underground
    * Portable suitcases

The tele-remote control operator stations are purpose-built and can be manufactured to suit a specific client’s requirements. Each station (excluding the portable suitcase) is equipped with an operator’s chair, two LCDs, audio and machine fault feedback, and air-conditioning.

The stations are connected to the area in which the machine is operational via an independent communication system, which is designed for each individual work area by GM Mining Electrics’ fully trained staff.
Machine logic control system

GM Mining Electrics provides a machine logic control system, complete with a camera, a pan and tilt unit and a microphone.
Machine logic fixed-view camera

GM Mining Electrics’ fixed-view 1/3in CCD colour camera has the following features:

    * 450TVL resolution
    * Effective pixels – 380,000(N), 440,000(P)
    * 2.8mm focal length
    * Composite PAL video signal of 1.0V peak-to-peak output
    * Marine-grade aluminium housing with a protective glass view port
    * 12V to 26V input

Machine logic zoom camera

GM Mining Electrics’ zoom camera has the following characteristics:

    * 26x zoom lens
    * 460TVL resolution
    * 440,000px
    * Composite PAL video signal of 1.0V peak-to-peak output
    * Marine-grade aluminium housing with a protective glass view port
    * 12V input

Machine logic pan and tilt unit

GM Mining Electrics’ pan and tilt unit has the following features:

    * Weatherproof heavy duty anodised aluminium construction
    * 12V input
    * 340° pan
    * +/-45° tilt
    * Adjustable limit switches

Microphone

GM Mining Electrics’ machine logic control system has a high gain microphone with a 12V input.
Electrical and hydraulic interface

GM Mining Electrics specifically designs electrical and hydraulic interfaces, which are unique to each remote controlled machine. Each interface is designed, built and commissioned with care by GM Mining Electrics’ experienced staff.

The company’s commitment to quality and service makes it a global leader in remote and in the mining industry.
Info Icon Contact Details
GM Mining Electrics
17 Muros Place
Midvale
WA 6056
Australia
Tel: +61 8 9250 6455
Fax: +61 8 9250 6466
Email: enquiries@gmminingelectrics.com.au
URL: www.gmminingelectrics.com.au

Tags: , ,

Related posts